Description
TAKEX F70AGK
Cảm biến quang hiển thị kỹ thuật số F70AGK Takex. – Nguồn cấp: 12-24 VDC ±10% Ripple 10% max. – Dòng tiêu thụ: 39 mA max. – Nguồn sáng: Led xanh lá (525 nm)
F70AGK
Rating/Performance/Specification
| Power supply | 12 – 24VDC ± 10% / Ripple 10% or less |
|---|---|
| Current consumption | 39 mA or less |
| Output mode | Control output (*) : Open collector output / Rating: Sink current 100 mA (30 VDC) or less / Residual voltage: 1 V or less |
| Operation mode | Light ON/Dark ON selectable |
| Timer | Off delay/disabled selectable Delay time: 40 ms fixed |
| Response time | Frequency channel 1: 600 μs or less Frequency channel 2: 700 μs or less |
| Light source (wavelength) | Green LED (525nm) |
| Indicator | Operation indicator: orange LED / Stability indicator: green LED |
| Display | LCD display with backlight |
| Switch | 2 set buttons / Mode selector switch: RUN/SET |
| Sensitivity setting | Full auto teaching / Auto teaching |
| Sensitivity setting input | Set button input |
| Sensitivity adjustment function | Provided (manual sensitivity adjustment) |
| Functions | * Mutual Interference prevention feature * Short circuit protection feature |
| Material | Polycarbonate |
| Connection between amplifier units | Connector (for power supply) Input-output connection Connector: (using a dedicated connector cable *1) |
| Maximum number of attachments and detachments of connector | 50 or less |
| Weight | Approx. 20 g (main unit only) |
| Accessory | Instruction manual, Terminal cap |
* When you connect more than one sensor, you can supply the electric power to any of them. However, the output current is different, depending on which sensor is supplied with the power.
When the power supply is for the center part, control output is 50 mA or less (F70A type: 70 mA or less); stability output is 20 mA or less
When the power supply is for either end, control output is 20 mA or less (F70A type: 40 mA or less); stability output is 20 mA or less
Detection can start when more than 0.5 seconds has passed after power-up. If the load and this sensor use different power sources, be sure to turn on the sensor first.
*1 Please use a connector cable dedicated for input-output connection which is sold separately.
Power/output connector cable
Model F7K-4 (4 core; colors of lead wires: brown, blue, black, orange)
Model F7K-3 (3 core; colors of lead wires: brown, blue, black)
Connector cable dedicated for output
Model F7K-2 (2 core; colors of lead wires: black, orange)
Model F7K-1 (1 core; color of lead wire: black)
Đại lý TAKEX vietnam, TAKEX viet nam, TAKEX vietnam distributor, Phân phối TAKEX tại việt nam
Đại lý TAKEX vietnam, TAKEX viet nam,TAKEX vietnam distributor, Phân phối TAKEX tại việt nam
Đại lý TAKEX vietnam, TAKEX viet nam, TAKEX vietnam distributor, Phân phối TAKEX tại việt nam
Đại lý TAKEX vietnam, TAKEX viet nam, TAKEX vietnam distributor, Phân phối TAKEX tại việt nam
Đại lý TAKEX vietnam, TAKEX viet nam, TAKEX vietnam distributor, Phân phối TAKEX tại việt nam
Reviews
There are no reviews yet.