Description
PANASONIC NX5-M10RA
Cảm biến quang Panasonic NX5-M10RA(NX5-M10RAD+M10RP)
Cảm biến quang Panasonic NX5-M10RA
1.Cảm biến quang NX5-M10RA:
Mã sản phẩm NX5-M10RA
Tuân thủ quy định ・Chỉ thị về điện áp thấp ： EN IEC 60947-5-2
・Chỉ thị EMC ： EN IEC 60947-5-2
・Chỉ thị RoHS
・GB/T 14048.10
Phạm vi cảm biến 10 m 32,808 ft
Đối tượng cảm nhận ngày. đường kính 20 mm. Vật thể mờ đục 0,787 in trở lên
(Lưu ý) Nếu lắp mặt nạ khe (tùy chọn), có thể phát hiện vật thể nhỏ tới 3 x 6 mm 0,118 x 0,236 in.
Độ trễ –
Độ lặp lại (vuông góc với trục cảm biến) 0,1 mm 0,004 inch trở xuống
Cung cấp hiệu điện thế 24 đến 240 V AC +10-15 % hoặc 12 đến 240 V DC +10-15 % Ripple PP 10 % trở xuống
Sự tiêu thụ năng lượng Bộ phát: 1 VA trở xuống
Bộ thu: 2 VA trở xuống
Specifications
| Item | Performance characteristics |
|---|---|
| CE Marking Directive Compliance | ・Low Voltage Directive ： EN IEC 60947-5-2 ・EMC Directive ： EN IEC 60947-5-2 ・RoHS Directive ・GB/T 14048.10 |
| Sensing Range | 10 m 32.808 ft |
| Sensing Object | dia. 20 mm dia. 0.787 in or more opaque object (Note) If slit masks (optional) are fitted, an object as small as 3 x 6 mm 0.118 x 0.236 in can be detected. |
| Hysteresis | – |
| Repeatability (Perpendicular to Sensing Axis) | 0.1 mm 0.004 in or less |
| Supply Voltage | 24 to 240 V AC +10-15 % or 12 to 240 V DC +10-15 % Ripple P-P 10 % or less |
| Power Consumption | Emitter: 1 VA or less Receiver: 2 VA or less |
| Output | Relay contact 1 c – Switching capacity: 250 V AC 1 A (resistive load), 30 V DC 2 A (resistive load) – Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour), 100,000 or more switching operations (switching frequency 3,600 operations/hour) – Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour) |
| Output: Output Operation | Light-ON |
| Response Time | 10 ms or less |
| Operation Indicator | Red LED (lights up when the output is ON) |
| Stability Indicator | Green LED (lights up under stable light received condition or stable dark condition) |
| Power Indicator | – |
| Sensitivity Adjuster | Continuously variable adjuster |
| Automatic Interference Prevention Function | (Use optional interference prevention filters) |
| Pollution Degree | 3 (Industrial environment) |
| Ambient Temperature | –20 to +55 ℃ –4 to +131 ℉ (No dew condensation or icing allowed) (Note), Storage: –30 to +70 ℃ –22 to +158 ℉ (Note):In case the sensor is to be used at an ambient temperature of –15 ℃ +5 ℉, or less, please contact our office. |
| Protection | IP66 (IEC) |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,500 Lx or less at the light-receiving face |
| Voltage Withstandability | 1,500 V AC for one min. between all supply terminals connected together and enclosure, 1,500 V AC for one min. between power supply and output terminals, 1,000 V AC for one min. between relay contact terminals |
| Insulation Resistance | 20 MOhm , or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals |
| Vibration Resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions two hours each |
| Shock Resistance | 500 m/s2 (50 G approx.) in X, Y and Z directions three times each |
| Emitting Element | Red LED (modulated) |
| Emitting Element: Peak Emission Wavelength | 660 nm 0.026 mil |
| Material | Enclosure: Polycarbonate Lens: Polycarbonate Cover: Polycarbonate |
| Cable | 0.3 mm2 5-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long |
| Cable Extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). |
| Weight (Typ.) | Emitter: 100 g approx Receiver: 140 g approx |
| Accessory | Adjusting screwdriver: 1 pc. |
| Utilization Category | AC-12/DC-12 |
| Impulse withstand voltage | 2.5kV |
| Output minimum operational current | DC5V 1mA or more |
| Turn on time / Turn off time | 10ms / 10ms Note : Turn-On time and Turn-OFF time are the delay time between reference sensor and measurement sensor in case round plate rotates as below. |
| Maximum response frequency | 50Hz Note:The maximum response frequency is the value calculated below. Maximum response frequency = １ / (Turn on time＋Turn off time) |
| Class of protection against electric shock | Out of classification |
| Excess gain | 30% Note : Excess gain of NX5-M10□ is the value in case sensitivity aduster is in maximum position. |
| Note | Note 1 : Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. Note 2 : The output applied voltage should be the same as the supply voltage of the sensor. Note 3 : Be sure to add a short-circuit protection (a fuse or a breaker) to the power supply input and the output.. In addition, use 3A or less fast blow fuse or breaker. |
Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam
Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam
Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam
Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam
Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam
Reviews
There are no reviews yet.