Description
OMRON H7BX-AW
Electron Counter (DIN 72×72) – H7BX (H7BX-AW)
[Features]
· Bright, easy to view negative LCD display.
· A new standard DIN72 × 72 mm sized electronic counter.
· High visibility enabled by a negative LCD and back-lighting.
· Checking from a distance enabled by a display color change function (Red<=>Green).
· Simpler operation enabled by using vertical keys.
· All of the basic settings are possible by the dip switch.
· Total preset counter, batch counter, dual counter, tachometer loaded. Can deal with a wide range of inputs with multi
· NPN/PNP input, and compatible with DC two lead sensor.
· UL, CSA acquired.
· Compatible with the CE mark.
· Water resistant structure (only the front part of IP54).
Configured Specifications
| Type | Total counter | Display method | LCD |
|---|---|---|---|
| Display Digits | 6 digits | Mounting Method | Panel |
| Panel cut dimensions | [Other] 68×68 | Power Supply Voltage | AC-dedicated |
| Prescale | Available | Representative Standard | CE / UL |
| Dimension vertical(mm) | 72 | Dimension width(mm) | 72 |
| Dimension depth(mm) | 100 | Classification | Preset counter/tachometer |
| MAX input frequency (MAX counting speed) (Hz) | 30Hz/10kHz | Power supply voltage details(V) | AC 100–240 |
| Computing Method | Add/subtract/add-subtract | – | – |
| Format | Series H7BX-A/AD1 | Series H7BX-AW/AWD1 | |
|---|---|---|---|
| Type | Preset Counter | Preset Counter / Tachometer | |
| Function | 1-Stage Preset Counter Total Preset Counter (Switchable) *1 |
1-Stage Preset Counter 2-Stage Preset Counter Total Preset Counter *1 Batch Counter Dual Counter Tachometer (Switchable) |
|
| Rating | Power Supply Voltage*2 | 100 to 240 V AC, 50/60 Hz 24 V AC, 50/60 Hz / 12 to 24 V DC (ripple content is 20% or less) |
|
| Allowable Voltage Range | 85 to 110% of rated power supply voltage (90 to 110% for 12 V DC) | ||
| Power Consumption | Series H7BX-A/AW: 9.6 VA or less (100 to 240 V AC) Series H7BX-AD1/AWD1: 8 VA or less (24 V AC), 5.3 W or less (12 to 24 V DC) |
||
| Mounting Method | Embedded Mounting | ||
| External Connection Method | Screw-Fastening Terminal | ||
| Protective Structure | IP54 (Front Part Only) | ||
| Input Signal | CP1, CP2, Reset 1, Reset 2, Key Protect | ||
| Counter | Maximum Counting Speed | 30 Hz, 5 kHz (Switchable) (ON/OFF Ratio 1:1) CP1, CP2 Common Setting | |
| Input Mode | Addition, subtraction, addition and subtraction (UP/DOWN A [specified input], UP/DOWN B [individual input], UP/DOWN C [phase difference input]) |
||
| Output Mode | N, F, C, R, K-1, P, Q, A, K-2, D, L |
N, F, C, R, K-1, P, Q, A, K-2, D, L, H |
|
| One-Shot Time | 0.01 to 99.99 s | ||
| Recovery Method | External reset (minimum signal width:1 ms, 20 ms switchable), manual reset, Automatic reset (internal reset according to operation of C, R, P, Q modes) |
||
| Tachometer | Pulse Measurement Method | — | Periodic Measurement Method (Sampling Cycle: 200 ms) |
| Maximum Counting Speed | — | 30 Hz, 10 kHz (Switchable) | |
| Measurement Range | — | 30 Hz: 0.01 Hz to 30.00 Hz 10 kHz: 0.01 Hz to 10 kHz |
|
| Measurement Accuracy | — | ±0.1% F.S. ±1 digit or less (at 23±5°C) | |
| Output Mode | — | Upper/lower limit, range, upper limit, lower limit | |
| Auto Zero Time | — | 0.1 to 99.9 s | |
| Start-Up Compensation Timer | — | 0.0 to 99.9 s | |
| Average number of times | — | OFF / 2 times / 4 times / 8 times | |
| Pre-Scale Function | Available (0.001 To 99.999) | ||
| Decimal Point Setting | Available (Bottom 3 Digits) | ||
| Sensor Wait Time | 290 ms or less (during sensor wait time, input is not acknowledged with control output OFF) | ||
| Key Protect Input | Answer speed: approx. 1 s non-voltage (NPN) input (fixed) Impedance at short circuit: 1 kΩ or less (at 0 Ω outflow current: approx. 12 mA), residual voltage at short circuit: 3V or less, impedance when opening: 100 kΩ or more |
||
| Input Method (Excluding Key Protect Input) |
Non-voltage (NPN) input / voltage (PNP) input (switchable) During non-voltage input: impedance at short circuit: 1 kΩ or less (at 0 Ω outflow current: approx. 12 mA), residual voltage at short circuit: 3 V or less, impedance when opening: 100 kΩ or more During voltage input: “H” level: 4.5 to 30 V DC, “L” level: 0 to 2 V DC (input resistance approx. 4.7 kΩ) |
||
| Power Supply To External Equipment | 12 V DC (±10%) 100 mA max. | ||
| Control Output | Relay output contact: 250 V AC / 30 V DC 3 A Resistive load (cosø = 1), minimum applied load: 5 V DC 10 mA (P level, reference) Transistor output: 30 V DC max. 100 mA max. Residual voltage 1.5 V DC or less (actual power approx. 1 V DC), leak current 0.1 mA or less |
||
| Display Method*3 | 7-segment negative LCD with backlight Character height Count values: 13.5 mm (red/green) Setting values: 9 mm (green) |
||
| Number Of Digits | 6-digit -99,999 to 999,999 (-5 digits to +6 digits) |
6-digit When counter: -99,999 to 999,999 (-5 digits to +6 digits) When tachometer: 0 to 999,999 (6 digits) |
|
| Power Failure Memory Method | EEP-ROM (100,000 rewrites or more) data retention: 10 years or more | ||
| Operating Temperature Range | -10 to +55°C (No Freezing) | ||
| Storage Temperature Range | -25 to +65℃ (No Freezing) | ||
| Ambient Operating Humidity | 25 to 85% (No Condensation) | ||
| Case Color | Black (N1.5) | ||
| Accessories | Bracket for embedded mounting × 2, terminal cover | Bracket for embedded mounting × 2, terminal cover, seal for DIP switch setting |
|
Đại lý OMRON vietnam, OMRON viet nam, OMRON vietnam distributor, Phân phối OMRON tại việt nam
Đại lý OMRON vietnam, OMRON viet nam, OMRON vietnam distributor, Phân phối OMRON tại việt nam
Đại lý OMRON vietnam, OMRON viet nam, OMRON vietnam distributor, Phân phối OMRON tại việt nam
Đại lý OMRON vietnam, OMRON viet nam, OMRON vietnam distributor, Phân phối OMRON tại việt nam
Đại lý OMRON vietnam, OMRON viet nam, OMRON vietnam distributor, Phân phối OMRON tại việt nam
Reviews
There are no reviews yet.