FESTO EMMS-AS-100-S-HS-RS

Description

FESTO EMMS-AS-100-S-HS-RS

FESTO EMMS-AS-140-S-HS-RS

FESTO EMMS-AS-100-S-HS-RS 550122 => EMMT-AS-100-S-HS-RS

FESTO EMMS-AS-140-S-HS-RS 550131 =>EMMT-AS-150-M-HV-R3S

Technical Data

• Ambient temperature-40 °C … 40 °C
• Note on ambient temperatureUp to 80°C with derating of -1.5% per degree Celsius
• Max. installation height4000 m
• Note on max. installation heightAs of 1,000 m: only with derating of -1.0% per 100 m
• Storage temperature-40 °C … 70 °C
• Relative air humidity0 – 90%
• Conforms to standardIEC 60034
• Temperature class as per EN 60034-1F
• Max. winding temperature155 °C
• Rating class as per EN 60034-1S1
• Temperature monitoringDigital motor temperature transmission via EnDat® 2.2
• Motor type to EN 60034-7IM B5 IM V1 IM V3
• Mounting positionoptional
• Degree of protectionIP40
• Note on degree of protectionIP40 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components
• Concentricity, coaxiality, axial runout to DIN SPEC 42955N
• Balance qualityG 2.5
• Detent torque<1.0% of peak torque
• Bearing lifetime under nominal conditions20000 h
• Interface code, motor out100A
• Electrical connection 1, connection typeHybrid plug
• Electrical connection 1, connector systemM23x1
• Electrical connection 1, number of connections/cores15
• Electrical connection 1, connection pattern00995913
• Pollution degree2
• Note on materialsRoHS-compliant
• Corrosion resistance class CRC0 – No corrosion stress
• LABS (PWIS) conformityVDMA24364 zone III
• Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
• Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
• ApprovalRCM trademark c UL us – Recognized (OL)
• CE mark (see declaration of conformity)To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive
• UKCA marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions To UK regulations for electrical equipment
• Certificate issuing authorityUL E342973
• Nominal operating voltage DC680 V
• Type of winding switchStar inside
• Number of pole pairs5
• Standstill torque6.3 Nm
• Nominal torque5.1 Nm
• Peak torque13.7 Nm
• Nominal rotary speed2700 rpm
• Max. rotational speed4770 rpm
• Max. mechanical speed13000 rpm
• Angular acceleration≤100000 rad/s²
• Nominal power rating of motor1450 W
• Continuous stall current4.4 A
• Nominal motor current3.5 A
• Peak current13.7 A
• Motor constant1.45 Nm/A
• Standstill torque constant1.67 Nm/A
• Voltage constant, phase-to-phase101 mVmin
• Phase-phase winding resistance3.35 Ohm
• Phase-phase winding inductance32.4 mH
• Winding longitudinal inductivity Ld (phase)17.8 mH
• Winding cross inductivity Lq (phase)24.3 mH
• Electric time constant14.5 ms
• Thermal time constant74 min
• Thermal resistance0.6 K/W
• Measuring flange300 x 300 x 20 mm, steel
• Total mass moment of inertia of output3.15 kgcm²
• Product weight5500 g
• Permissible axial shaft load200 N
• Permissible radial shaft load1110 N
• Rotor position sensorAbsolute single-turn encoder
• rotor position sensor, manufacturer designationECI 1319
• rotor position sensor, absolute detectable revolutions1
• Rotor position encoder interfaceEnDat® 22
• Rotor position sensor, encoder measuring principleInductive
• rotor position sensor, DC operating voltage5 V
• rotor position sensor, DC operating voltage range3.6 V … 14 V
• rotor position sensor, position values per revolution524288
• Rotor position transducer resolution19 bit
• rotor position sensor, system accuracy of angle measurement-65 arcsec … 65 arcsec
• Mean time to failure (MTTF), subcomponent190 years, rotor position sensor
• Energy efficiencyENEFF (CN) / Class 2