MITSUBISHI MR-J4-70B

Category: Tags: , ,

Description

MITSUBISHI MR-J4-70B

MR-J4-70B Bộ điều khiển Servo Driver Mitsubishi 0.75 kW 3 Pha hoặc 1 Pha 220 VAC SSCNET III/H

  • Bộ điều khiển động cơ Servo Mitsubishi dòng MR-J4-B
  • Điện áp hoạt động:
    • 3 pha 220VAC hoặc 1 pha 220VAC
  • Công suất: 0.75KW
  • Hỗ trợ giao tiếp SSCNET III/H
    • Kết nối điều khiển nhiều trục động cơ, kết nối với các Bộ điều khiển Servo Driver, Amplifier
    • Kết nối với các bộ điều khiển PLC hay Module điều khiển vị trí Motion Controller,…
  • Phần mềm cấu hình: Mr Configurator 2-SW1DNC-MRC2-E
    • Cáp Encoder kết nối Bộ điều khiển MR-J4 với động cơ Servo Motor: Cáp Encoder MR-J4
    • Cáp Nguồn kết nối Bộ điều khiển MR-J4 với động cơ Servo Motor: Cáp nguồn MR-J4
    • Cáp phanh kết nối Bộ điều khiển MR-J4 với động cơ Servo Motor: Cáp phanh MR-J4

Thông số kỹ thuật:

Servo amplifier model MR-J4- 10B 20B 40B 60B 70B
Output Rated voltage 3-phase 170 V AC
Rated current [A] 1.1 1.5 2.8 3.2 5.8
Main circuit power supply Voltage/frequency (Note 1) 3-phase or 1-phase 200 V AC to 240 V AC,
50/60 Hz
Rated current [A] 0.9 1.5 2.6 3.2 (Note 9) 3.8
Permissible voltage fluctuation 3-phase or 1-phase 170 V AC to 264 V AC
Permissible frequency fluctuation ±5% maximum
Control circuit power supply Voltage/frequency 1-phase 200 V AC to 240 V AC, 50/60 Hz
Rated current [A] 0.2
Permissible voltage fluctuation 1-phase 170 V AC to 264 V AC
Permissible frequency fluctuation ±5% maximum
Power consumption [W] 30
Interface power supply 24 V DC ± 10% (required current capacity: 0.3 A (including CN8 connector signal))
Load-side encoder interface (Note 8) Mitsubishi high-speed serial communication
Tolerable regenerative power of
the built-in regenerative resistor [W]
(Note 2, 3)		 – 10 10 10 20
Control method Sine-wave PWM control/current control method
Dynamic brake Built-in (Note 4)
Protective functions Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection
Fully closed loop control Available in the future
Safety function (Note 10) STO (IEC/EN 61800-5-2)
Safety performance Standards certified by CB EN ISO 13849-1 Category 3 PL d, EN 61508 SIL 2, EN 62061 SIL CL 2, EN 61800-5-2 SIL 2
Response performance 8 ms or less (STO input OFF → energy shut-off)
Test pulse input (STO) (Note 7) Test pulse frequency: 1 Hz to 25 Hz
Test pulse off time: 1 ms maximum
Mean time to dangerous failure (MTTFd) 100 years
Average diagnostic coverage
(DCavg)		 90%
Probability of dangerous
Failure per Hour (PFH)		 1.01 × 10-7 [1/h]
Communication function USB: Connect a personal computer (MR Configurator2 compatible)
Compliance to standards CE marking LVD: EN 61800-5-1
EMC: EN 61800-3
MD: EN ISO 13849-1, EN 61800-5-2, EN 62061
UL standard UL 508C
Structure (IP rating) Natural cooling, open (IP20) Force cooling, open (IP20)
Close mounting Possible (Note 6)
Mass [kg] 0.8 0.8 1 1 1.4

 

Kết hợp động cơ Servo Motor:

Servo amplifier Rotary servo motor Linear servo motor (primary side) (Note 1) Direct drive motor
MR-J4-10B HG-KR053, 13
HG-MR053, 13		 – –
MR-J4-20B HG-KR23
HG-MR23		 LM-U2PAB-05M-0SS0
LM-U2PBB-07M-1SS0		 TM-RFM002C20
MR-J4-40B HG-KR43
HG-MR43		 LM-H3P2A-07P-BSS0
LM-H3P3A-12P-CSS0
LM-K2P1A-01M-2SS1
LM-U2PAD-10M-0SS0
LM-U2PAF-15M-0SS0		 TM-RFM004C20
MR-J4-60B HG-SR51, 52 LM-U2PBD-15M-1SS0 TM-RFM006C20
TM-RFM006E20
MR-J4-70B HG-KR73
HG-MR73		 LM-H3P3B-24P-CSS0
LM-H3P3C-36P-CSS0
LM-H3P7A-24P-ASS0
LM-K2P2A-02M-1SS1
LM-U2PBF-22M-1SS0		 TM-RFM012E20
TM-RFM012G20
TM-RFM040J10
MR-J4-100B HG-SR81, 102 – TM-RFM018E20
MR-J4-200B HG-SR121, 201, 152, 202 LM-H3P3D-48P-CSS0
LM-H3P7B-48P-ASS0
LM-H3P7C-72P-ASS0
LM-FP2B-06M-1SS0
LM-K2P1C-03M-2SS1
LM-U2P2B-40M-2SS0		 –
MR-J4-350B HG-SR301, 352 LM-H3P7D-96P-ASS0
LM-K2P2C-07M-1SS1
LM-K2P3C-14M-1SS1
LM-U2P2C-60M-2SS0		 TM-RFM048G20
TM-RFM072G20
TM-RFM120J10
MR-J4-500B HG-SR421, 502 LM-FP2D-12M-1SS0
LM-FP4B-12M-1SS0
LM-K2P2E-12M-1SS1
LM-K2P3E-24M-1SS1
LM-U2P2D-80M-2SS0		 TM-RFM240J10
MR-J4-700B HG-SR702 LM-FP2F-18M-1SS0
LM-FP4D-24M-1SS0		 –
Primary brand Mitsubishi Electric
Main function AC servo drive
Product series / family name MELSERVO J4 series
Sub-range name MR-J4 series
Functions AC motion servo drive / amplifiersine wave PWM control/current control method2-channel analog monitorSafe torque off (STO)fully closed loop controlload-side encoder interfaceadvanced vibration suppression control IIadaptive filter IIrobust filterauto tuningone-touch tuningtough drive functiondrive recorder functiontightening & press-fit functionmachine diagnosis functionpower monitoring functioncontroller-peripheral operation Function scale measurement functionJ3 compatibility modesuper trace controllost motion compensation
Design built-in dynamic brakebuilt-in regenerative resistor2-wire type communication methodforced ventilation coolingSSCNET III/H
Supply voltage (AC) 200Vac-240Vac (200V class; 220Vac / 230Vac)
Type of network Single-phase input (2P) or 3-phase input (3P)
Rated current 5.8A
Rated active power (kW) 750W / 0.75kW
Protection functions overcurrent shut-offregenerative overvoltage shut-offoverload shut-off (electronic thermal)servo motor overheat protectionencoder fault protectionregenerative fault protectionundervoltage protectioninstantaneous power failure protectionoverspeed protectionexcessive error protectionmagnetic pole detection protectionlinear servo control fault protection
Net Height (mm) 168 mm
Net Width (mm) 60 mm
Net Depth (mm) 185 mm
Digital inputs 1 x digital input (24Vdc; sink/source) (EM2)1 x digital input (24Vdc; sink/source) (FLS)1 x digital input (24Vdc; sink/source) (RLS)1 x digital input (24Vdc; sink/source) (DOG)
Digital outputs 1 x digital output (rly. contact type) (ALM)1 x digital relay output (MBR)1 x digital output (rly. contact type) (INP)
Analog outputs 1 x analog output (-10…+10Vdc) (MO1)1 x analog output (-10…+10Vdc) (MO2)
Degree of protection IP20
Dimensions H168mm x W60mm x D185mm
Ambient air temperature for operation 0…+55 °C
Ambient air temperature for storage -20°C…+65 °C
Current consumption 3.8A input
Power consumption(drive auxiliary power consumption) 30 W
Order code / Manufacturer SKU MR-J4-70B
Manufacturer product status Commercialized
Equivalent to MRJ470B
Compliant with standard(s) CE markingTUV RheinlandcULusULKCEN61800-5-2EN61800-5-1EN61800-3EN ISO 13849-1 PLe Cat3EN62061SILCL3IEC61508-5-2EN50581UL508CCSAKCEAC
Benefits high-speed serial communication
Recommended accessoriescompatible with servo motors HG-KR73 (4.8A)HG-MR73 (5.8A)HG-JR73 (5.6A)HG-UR72 (5.4A)LM-H3P3B-24P-CSS0 (3.4A)LM-H3P3C-36P-CSS0 (5.1A)LM-H3P7A-24P-ASS0 (3.4A)LM-K2P2A-02M-1SS1 (3.7A)LM-U2PBF-22M-1SS0 (4.6A)TM-RFM012E20 (3.8A)TM-RFM012G20 (3.6A)TM-RFM040J10 (4.3A)

 

Mitsubishi MR-J4

 

 

Thịnh thành

Bộ điều khiển Servo Mitsubishi MR-J4-70B 0.75kW 220V

6.500.000 ₫

SKU: MR-J4-70B
Thương hiệu: Mitsubishi
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT

Dịch vụ kèm theo:
✓ Cài đặt & sửa chữa Servo Mitsubishi theo yêu cầu
✓ Hỗ trợ kỹ thuật trong quá trình sử dụng
✓ Lắp đặt & vận hành tận nơi

Báo giá

Mã: MR-J4-70BDanh mục: , Thẻ: 
Primary brand Mitsubishi Electric
Main function AC servo drive
Product series / family name MELSERVO J4 series
Sub-range name MR-J4 series
Functions AC motion servo drive / amplifiersine wave PWM control/current control method2-channel analog monitorSafe torque off (STO)fully closed loop controlload-side encoder interfaceadvanced vibration suppression control IIadaptive filter IIrobust filterauto tuningone-touch tuningtough drive functiondrive recorder functiontightening & press-fit functionmachine diagnosis functionpower monitoring functioncontroller-peripheral operation Function scale measurement functionJ3 compatibility modesuper trace controllost motion compensation
Design built-in dynamic brakebuilt-in regenerative resistor2-wire type communication methodforced ventilation coolingSSCNET III/H
Supply voltage (AC) 200Vac-240Vac (200V class; 220Vac / 230Vac)
Type of network Single-phase input (2P) or 3-phase input (3P)
Rated current 5.8A
Rated active power (kW) 750W / 0.75kW
Protection functions overcurrent shut-offregenerative overvoltage shut-offoverload shut-off (electronic thermal)servo motor overheat protectionencoder fault protectionregenerative fault protectionundervoltage protectioninstantaneous power failure protectionoverspeed protectionexcessive error protectionmagnetic pole detection protectionlinear servo control fault protection
Net Height (mm) 168 mm
Net Width (mm) 60 mm
Net Depth (mm) 185 mm
Digital inputs 1 x digital input (24Vdc; sink/source) (EM2)1 x digital input (24Vdc; sink/source) (FLS)1 x digital input (24Vdc; sink/source) (RLS)1 x digital input (24Vdc; sink/source) (DOG)
Digital outputs 1 x digital output (rly. contact type) (ALM)1 x digital relay output (MBR)1 x digital output (rly. contact type) (INP)
Analog outputs 1 x analog output (-10…+10Vdc) (MO1)1 x analog output (-10…+10Vdc) (MO2)
Degree of protection IP20
Dimensions H168mm x W60mm x D185mm
Ambient air temperature for operation 0…+55 °C
Ambient air temperature for storage -20°C…+65 °C
Current consumption 3.8A input
Power consumption(drive auxiliary power consumption) 30 W
Order code / Manufacturer SKU MR-J4-70B
Manufacturer product status Commercialized
Equivalent to MRJ470B
Compliant with standard(s) CE markingTUV RheinlandcULusULKCEN61800-5-2EN61800-5-1EN61800-3EN ISO 13849-1 PLe Cat3EN62061SILCL3IEC61508-5-2EN50581UL508CCSAKCEAC
Benefits high-speed serial communication
Recommended accessoriescompatible with servo motors HG-KR73 (4.8A)HG-MR73 (5.8A)HG-JR73 (5.6A)HG-UR72 (5.4A)LM-H3P3B-24P-CSS0 (3.4A)LM-H3P3C-36P-CSS0 (5.1A)LM-H3P7A-24P-ASS0 (3.4A)LM-K2P2A-02M-1SS1 (3.7A)LM-U2PBF-22M-1SS0 (4.6A)TM-RFM012E20 (3.8A)TM-RFM012G20 (3.6A)TM-RFM040J10 (4.3A)

Mitsubishi MR-J4

 

 

Reviews

There are no reviews yet.

Be the first to review “MITSUBISHI MR-J4-70B”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Sản phẩm liên quan