PANASONIC CX-411

PANASONIC CX-411

ĐT: 0937 876 353
Face. Zalo : 0937 876 353
ĐC: 28/1/16 Đường 16, P. Linh Chiểu, TP. Thủ Đức, TP. HCM

Description

PANASONIC CX-411

CX-411 ( CX-411D + CX-411E )

Cảm biến quang Panasonic CX-411

1. Cảm biến quang CX-411:

Tuân thủ quy định Chỉ thị EMC, Chỉ thị RoHS
Phạm vi cảm biến 10 m 32,808 ft
Đối tượng cảm biến Vật thể mờ đục Ø12 mm Ø0.472 in trở lên
Độ lặp lại (vuông góc với trục cảm biến) 0,5 mm 0,020 inch trở xuống
Cung cấp hiệu điện thế 12 đến 24 V DC cộng hoặc trừ 10% Ripple PP 10% trở xuống
Mức tiêu thụ hiện tại Máy phát: 15 mA trở xuống
Máy thu: 10 mA trở xuống
Đầu ra Bóng bán dẫn cực thu hở NPN
– Dòng chìm tối đa: 100 mA
– Điện áp áp dụng: 30 V DC trở xuống (giữa đầu ra và 0 V)
​​- Điện áp dư: 2 V trở xuống (ở dòng chìm 100 mA), 1 V trở xuống (ở 16 mA chìm hiện tại)
Đầu ra: Hoạt động đầu ra Có thể chuyển đổi BẬT sáng hoặc BẬT tối
Đầu ra: Bảo vệ ngắn mạch Kết hợp
Thời gian đáp ứng 1 mili giây trở xuống
Chỉ báo hoạt động Đèn LED màu cam (sáng lên khi đầu ra BẬT)
(được tích hợp trên bộ thu cho loại chùm tia)
Chỉ báo độ ổn định Đèn LED màu xanh lá cây (sáng lên trong điều kiện nhận ánh sáng ổn định hoặc điều kiện bóng tối ổn định)
(được tích hợp trên bộ thu cho loại chùm tia qua)
Chỉ số sức mạnh Đèn LED xanh lục (sáng lên khi BẬT nguồn)
(được tích hợp trên bộ phát)
Bộ điều chỉnh độ nhạy Bộ điều chỉnh biến đổi liên tục (được tích hợp trên bộ thu cho loại chùm tia)

2. Các mã hàng tương đương Cảm biến quang  CX-411:

CX-411
CX-411D
CX-413
CX-421
CX-421-P
CX-421-P-Z
CX-422
CX-424
CX-441
CX-441-P
CX-441-P-Z
CX-442
CX-442-P
CX-442-P-Z
CX-442-Z
CX-446A

CX-411 | Compact Photoelectric Sensor CX-400 Ver.2

Spec Detail

Item Specifications
Product Number CX-411
Part Number CX-411
Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range 10 m 32.808 ft
Sensing object Ø12 mm Ø0.472 in or more opaque object
(Note) If slit masks (optional) are fitted, an object of Ø0.5 mm Ø0.020 in (using round slit mask) can be detected.
Hysteresis
Repeatability(perpendicular to sensing axis) 0.5 mm 0.020 in or less
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption Emitter: 15 mA or less
Receiver: 10 mA or less
Output NPN open-collector transistor
– Maximum sink current: 100 mA
– Applied voltage: 30 V DC or less (between output and 0 V)
– Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation Switchable either Light-ON or Dark-ON
Output:Short-circuit protection Incorporated
Response time 1 ms or less
Operation indicator Orange LED(lights up when the output is ON)
(incorporated on the receiver for thru-beam type)
Stability indicator Green LED(lights up under stable light received condition or stable dark condition)
(incorporated on the receiver for thru-beam type)
Power indicator Green LED(lights up when the power is ON)
(incorporated on the emitter)
Sensitivity adjuster Continuously variable adjuster(incorporated on the receiver for thru-beam type)
Automatic interference prevention function Two units of sensors can be mounted close together with interference prevention filters. (Sensing range: 5 m 16.404 ft)
Protection IP67 (IEC)
Ambient temperature – 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element (modulated) Red LED
Emitting element (modulated):Peak emission wavelength 680 nm 0.027 mil
Material Enclosure: PBT (polybutylene terephthalate)
Lens: acrylic
Indicator cover: acrylic
Cable 0.2 mm23-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver).
Weight Net weight: 95 g approx.
Gross weight: 100 g approx.
Accessory

 

Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam

Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam

Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam

Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam

Đại lý Panasonic vietnam, Panasonic viet nam, Panasonic vietnam distributor, Phân phối Panasonic tại việt nam

Reviews

There are no reviews yet.

Be the first to review “PANASONIC CX-411”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *