PANASONIC MLDET2310P

Description

PANASONIC MLDET2310P

Tên sản phẩm: Bộ cài đặt tốc độ động cơ 200W Panasonic MLDET2210P

Hãng sản xuất: Panasonic

Thời gian bảo hành: Theo quy định của nhà sản xuất

Dòng: E series

Family: Minas E

Tần số phản hồi: 0.4 KHz

Công suất dòng điện định mức 15A

Dòng điện phát hiện định mức 10A

Phương pháp điều khiển : Điều khiển vị trí

Nguồn cấp: 200~240 VAC 3Pha

Kích thước: 40*140*105 mm

Thông số Encoder phản hồi: 2500 P/R (độ phân giải 10000) tương đối

I/O: 7 ngõ vào, 4 ngõ ra

Giao tiếp: RS232

Chức năng bảo vệ: Không

Mã hàng khác: MLDET2210P, MLDET2510P

Part Number MLDET2310P
Product Servo Driver
Details Ultra compact position control type
without the safety function
Product Name MINAS E Series Servo Driver
Features Position control type, 50 W to 400 W, Input power supply for Driver: Voltage AC 100 V/200 V, 2500 p/r incremental encoder, Frequency response 400 Hz

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
Item Specifications
Part Number MLDET2310P
Product details Ultra compact position control type
without the safety function
Family Name MINAS E
Series E series
Type Ultra compact position control type
Frame L-Frame
Frequency response (kHz) 0.4
Control method Position control
Safety Function without
Power device Max. current rating 15A
Current detector current rating 10A
Supply voltage 3-phase 200 V
I/F Classification of type Pulse train only
Dimensions (W) (Unit: mm) 40
Dimensions (H) (Unit: mm) 140
Dimensions (D) (Unit: mm) 105
Mass (kg) 0.40
Environment For more details, please refer to the instruction manual.

Basic Specifications

Item Specifications
Input power 3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz
Encoder feedback 2500 P/r (10000 resolution) incremental encoder
Parallel I/O connector:
Control signal Input
7 inputs (1) Servo-ON, (2) Alarm clear and other inputs vary depending on the control mode.
Parallel I/O connector:
Control signal Output
4 outputs
(1) Servo alarm, (2) Alarm, (3) Release signal of external brake and other outputs vary depending on the control mode.
Parallel I/O connector:
Pulse signal Input
2 inputs Supports both line driver I/F and open collector I/F.
Parallel I/O connector:
Pulse signal Output
4 outputs
Feed out the encoder pulse (A, B and Z-phase) in line driver. Z-phase pulse is also feed out in open collector.
Communication function RS232
Communication function: RS232 1: 1 communication to a host with RS232 interface is enabled.
Regeneration No built-in regenerative resistor (external resistor only)
Control mode The following 3 modes are selectable with parameter
(1) High-speed position control, (2) Internal velocity control, (3) High-functionality position control

Các sản phẩm thông dụng cùng loại:

Cảm biến quang Panasonic EQ-34 (UEQ34)
Cảm biến quang Panasonic EQ-501 (UEQ501)
Cảm biến quang Panasonic EQ-511 (UEQ511)
Cảm biến quang Panasonic EQ-512 (UEQ512)

Cảm biến quang Panasonic EQ-502

Panasonic RX-D700 Panasonic RX-M50 (Panasonic RX-M50D / RX-M50P)

Panasonic CX-446A Cảm biến quang điện Panasonic CX-446A

Panasonic RX-M10 Cảm biến quang điện Panasonic RX-M10D + RX-M10P

Panasonic EQ-34-J / EQ-34 Cảm biến quang điện Panasonic EQ-34-J / EQ-

Thiết bị khử tĩnh điện Panasonic ER-Q

Giá đỡ cho Panasonic MS-EQ5-01 Panasonic EQ-512 / 502/511 / 501

EQ-511 Cảm biến Panasonic EQ-511 Panasonic EQ-511

Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam

Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam

Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam

Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam

Đại lý PANASONIC vietnam, PANASONIC viet nam, PANASONIC vietnam distributor, Phân phối PANASONIC tại việt nam

Reviews

There are no reviews yet.

Be the first to review “PANASONIC MLDET2310P”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *