Description
SCHNEIDER LC1D95M7
Khởi động từ Schneieder dòng TeSys LC1D Series là sự kết hợp giữa độ bền của điện và máy cơ học, cung cấp đến một bộ tiếp xúc có độ tin cậy cao. Trong hệ thống điều khiển TeSys LC1D được thiết kế động cơ tích hợp sao cho phù hợp với bất kỳ các loại ứng dụng khác nhau. Khởi động từ Schneider dòng TeSys LC1D series được tối ưu đơn giản, nhưng vẫn đảm bảo tuân thủ đầy đủ các tiêu chuẩn của quốc tế.
Những tính năng ưu Việt của khởi động từ Schneider TeSys LC1D Series
Có thể lắp bảng điều khiển bằng vít hoặc DIN Rail
Các điểm tiếp xúc phụ được tích hợp sẵn cho khả năng chuyển đổi bổ sung
Thiết bị đầu cuối đạt tiêu chuẩn IP20
Bộ triệt tiêu diode giới hạn đỉnh hai chiều để bảo vệ cuộn dây
Contactor, TeSys Deca, 3P(3NO), AC-3/AC-3e, 440V, 95A, 220V AC 50/60Hz coil, screw clamp terminals
LC1D95M7
| Range | TeSys |
|---|---|
| Range of product | TeSys Deca |
| Product or component type | Contactor |
| Device short name | LC1D |
| contactor application | Motor control Resistive load |
| Utilisation category | AC-3 AC-3e AC-4 AC-1 |
| poles description | 3P |
| [Ue] rated operational voltage | Power circuit: <= 690 V AC 25…400 Hz |
| [Ie] rated operational current | 95 A (at <60 °C) at <= 440 V AC-3 for power circuit 125 A (at <60 °C) at <= 690 V AC-1 for power circuit 95 A (at <60 °C) at <= 440 V AC-3e for power circuit |
| [Uc] control circuit voltage | 220 V AC 50/60 Hz |
| Motor power kW | 25 kW at 220…230 V AC 50 Hz (AC-3) 45 kW at 380…400 V AC 50 Hz (AC-3) 45 kW at 415…440 V AC 50 Hz (AC-3) 55 kW at 500 V AC 50 Hz (AC-3) 45 kW at 660…690 V AC 50 Hz (AC-3) 15 kW at 400 V AC 50 Hz (AC-4) 25 kW at 220…230 V AC 50 Hz (AC-3e) 45 kW at 380…400 V AC 50 Hz (AC-3e) 45 kW at 415…440 V AC 50 Hz (AC-3e) 55 kW at 500 V AC 50 Hz (AC-3e) 45 kW at 660…690 V AC 50 Hz (AC-3e) |
|---|---|
| Motor power hp | 7.5 hp at 120 V AC 60 Hz for 1 phase motors 15 hp at 230/240 V AC 60 Hz for 1 phase motors 30 hp at 200/208 V AC 60 Hz for 3 phases motors 30 hp at 230/240 V AC 60 Hz for 3 phases motors 60 hp at 460/480 V AC 60 Hz for 3 phases motors 60 hp at 575/600 V AC 60 Hz for 3 phases motors |
| Compatibility code | LC1D |
| Pole contact composition | 3 NO |
| Protective cover | With |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) for signalling circuit 125 A (at 60 °C) for power circuit |
| Irms rated making capacity | 1100 A at 440 V AC for power circuit conforming to IEC 60947 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 |
| Rated breaking capacity | 1100 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current | 1100 A 40 °C – 1 s for power circuit 800 A 40 °C – 10 s for power circuit 400 A 40 °C – 1 min for power circuit 135 A 40 °C – 10 min for power circuit 140 A – 100 ms for signalling circuit 120 A – 500 ms for signalling circuit 100 A – 1 s for signalling circuit |
| Associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 200 A gG at <= 690 V coordination type 1 for power circuit 160 A gG at <= 690 V coordination type 2 for power circuit |
| Average impedance | 0.8 mOhm – Ith 125 A 50 Hz for power circuit |
| Power dissipation per pole | 12.5 W AC-1 7.2 W AC-3 7.2 W AC-3e |
| [Ui] rated insulation voltage | Power circuit: 1000 V conforming to IEC 60947-4-1 Power circuit: 600 V CSA certified Power circuit: 600 V UL certified Signalling circuit: 690 V conforming to IEC 60947-1 Signalling circuit: 600 V CSA certified Signalling circuit: 600 V UL certified |
| Overvoltage category | III |
| Pollution degree | 3 |
| [Uimp] rated impulse withstand voltage | 8 kV conforming to IEC 60947 |
| Safety reliability level | B10d = 1.3 Mcycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20 Mcycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Mechanical durability | 4 Mcycles |
| Electrical durability | 1.2 Mcycles 95 A AC-3 1.3 Mcycles 125 A AC-1 1.2 Mcycles 95 A AC-3e |
| Control circuit type | AC at 50/60 Hz standard |
| Coil technology | Without built-in suppressor module |
| Control circuit voltage limits | 0.8…1.1 Uc (-40…55 °C):operational AC 50 Hz 0.85…1.1 Uc (-40…55 °C):operational AC 60 Hz 0.3…0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz 1…1.1 Uc (55…70 °C):operational AC 50/60 Hz |
| Inrush power in VA | 245 VA 60 Hz cos phi 0.75 (at 20 °C) 245 VA 50 Hz cos phi 0.75 (at 20 °C) |
| Hold-in power consumption in VA | 26 VA 60 Hz cos phi 0.3 (at 20 °C) 26 VA 50 Hz cos phi 0.3 (at 20 °C) |
| Heat dissipation | 6…10 W at 50/60 Hz |
| Operating time | 20…35 ms closing 6…20 ms opening |
| Maximum operating rate | 3600 cyc/h 60 °C |
| Maximum operating rate | 3600 cyc/h at 60 °C |
| Connections – terminals | Control circuit: screw clamp terminals 2 1…2.5 mm² – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1…2.5 mm² – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 1…4 mm² – cable stiffness: solid without cable end Control circuit: screw clamp terminals 2 1…4 mm² – cable stiffness: solid without cable end Power circuit: connector 1 4…50 mm² – cable stiffness: flexible without cable end Power circuit: connector 2 4…25 mm² – cable stiffness: flexible without cable end Power circuit: connector 1 4…50 mm² – cable stiffness: flexible with cable end Power circuit: connector 2 4…16 mm² – cable stiffness: flexible with cable end Power circuit: connector 1 4…50 mm² – cable stiffness: solid without cable end Power circuit: connector 2 4…25 mm² – cable stiffness: solid without cable end |
| Tightening torque | Control circuit: 1.2 N.m – on screw clamp terminals – with screwdriver flat Ø 6 mm Control circuit: 1.2 N.m – on screw clamp terminals – with screwdriver Philips No 2 Power circuit: 12 N.m – on connector – with screwdriver flat Ø 6 to Ø 8 mm Power circuit: 12 N.m – on connector hexagonal screw head 4 mm Control circuit: 1.2 N.m – on screw clamp terminals – with screwdriver pozidriv No 2 |
| Auxiliary contact composition | 1 NO + 1 NC |
| Auxiliary contacts type | type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 |
| Signalling circuit frequency | 25…400 Hz |
| Minimum switching voltage | 17 V for signalling circuit |
| Minimum switching current | 5 mA for signalling circuit |
| Insulation resistance | > 10 MOhm for signalling circuit |
| Non-overlap time | 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact |
| mounting support | Rail Plate |
| Standards | EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 CSA C22.2 No 14 UL 60947-4-1 IEC 60335-2-40:Annex JJ UL 60335-2-40:Annex JJ IEC 60335-1:Clause 30.2 |
|---|---|
| product certifications | CCC UL CB Scheme CSA CE UKCA Marine EAC |
| IP degree of protection | IP20 front face conforming to IEC 60529 |
| Protective treatment | TH conforming to IEC 60068-2-30 |
| Climatic withstand | conforming to IACS E10 exposure to damp heat |
| Permissible ambient air temperature around the device | -40…60 °C 60…70 °C with derating |
| Operating altitude | 0…3000 m |
| Fire resistance | 850 °C conforming to IEC 60695-2-1 |
| Flame retardance | V1 conforming to UL 94 |
| Mechanical robustness | Vibrations contactor open (2 Gn, 5…300 Hz) Shocks contactor open (8 Gn for 11 ms) Vibrations contactor closed (3 Gn, 5…300 Hz) Shocks contactor closed (10 Gn for 11 ms) |
| Height | 127 mm |
| Width | 85 mm |
| Depth | 130 mm |
| Net weight | 1.61 kg |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 14.000 cm |
| Package 1 Width | 13.500 cm |
| Package 1 Length | 9.500 cm |
| Package 1 Weight | 1.556 kg |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 8.090 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 80 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 140.260 kg |
Schneider LC1D..M7
Bảng hướng dẫn lựa chọn Contactor Schneider dòng LC1D series với điện áp điều khiển 220V
| Model | Dòng chịu tải | Tiếp điểm | Công suất Motor | Điện áp điều khiển |
|---|---|---|---|---|
| LC1D09M7 | 9A | 1NO+1NC | 4kW | 220V |
| LC1D12M7 | 12A | 1NO+1NC | 5.5kW | 220V |
| LC1D18M7 | 18A | 1NO+1NC | 7.5kW | 220V |
| LC1D25M7 | 25A | 1NO+1NC | 11kW | 220V |
| LC1D32M7 | 32A | 1NO+1NC | 15kW | 220V |
| LC1D38M7 | 38A | 1NO+1NC | 18.5kW | 220V |
| LC1D40AM7 | 40A | 1NO+1NC | 18.5kW | 220V |
| LC1D50AM7 | 50A | 1NO+1NC | 22kW | 220V |
| LC1D65AM7 | 65A | 1NO+1NC | 30kW | 220V |
| LC1D80AM7 | 80A | 1NO+1NC | 37kW | 220V |
| LC1D95M7 | 95A | 1NO+1NC | 45kW | 220V |
| LC1D115M7 | 115A | 1NO+1NC | 55kW | 220V |
| LC1D150M7 | 150A | 1NO+1NC | 75kW | 220V |
Schneider LRD
Bảng hướng dẫn lựa chọn rơ le nhiệt Schneider dòng LRD series
| Model | Dải dòng chỉnh | Loại contactor tương thích |
|---|---|---|
| LRD14 | (7-10A) | LC1D09..LC1D38 |
| LRD16 | (9-13A) | LC1D12..LC1D38 |
| LRD21 | (12-18A) | LC1D18..LC1D38 |
| LRD22 | (16-24A) | LC1D25..LC1D38 |
| LRD32 | (23-32A) | LC1D25..LC1D38 |
| LRD35 | (30-38A) | LC1D32..LC1D38 |
| LRD313 | (9-13A) | LC1D40A..LC1D65A |
| LRD318 | (12-18A) | LC1D40A..LC1D65A |
| LRD325 | (16-25A) | LC1D40A..LC1D65A |
| LRD332 | (23-32A) | LC1D40A..LC1D65A |
| Model | Dải dòng chỉnh | Loại contactor tương thích |
|---|---|---|
| LRD340 | (30-40A) | LC1D40A..LC1D65A |
| LRD350 | (37-50A) | LC1D40A..LC1D65A |
| LRD365 | (48-65A) | LC1D40A..LC1D65A |
| LRD380 | (62-80A) | LC1D80A |
| LRD3365 | (80-104A) | LC1D80A, LC1D95 |
| LRD4365 | (80-104A) | LC1D115, LC1D150 |
| LRD4367 | (95-120A) | LC1D115, LC1D150 |
| LRD4369 | (110-140A) | LC1D150 |
Reviews
There are no reviews yet.