Description
SICK UE401-A0010 6027343
| Number of sensor pairs (sender and receiver) | 1 … 8 |
| Response time | ≤ 30 ms |
| Type | Type 4 (IEC 61496-1) 1) |
| Safety integrity level | SIL 3 (IEC 61508) 1) |
| Category | Category 4 (EN ISO 13849) 1) |
| Performance level | PL e (EN ISO 13849) 1) |
| PFHD (mean probability of a dangerous failure per hour) | 2.9 x 10-10 (EN ISO 13849) 1) |
| TM (mission time) | 20 years (EN ISO 13849) 1) |
| Safe state in the event of a fault | At least one OSSD is in the OFF state. |
1) Only in conjunction with L40 sensors.
|
|||||||
| Configuration method | Hard wired | ||||||
| Diagnostic display | 7-segment display | ||||||
| Status display | LEDs | ||||||
| Protection class | III (IEC 61140) | ||||||||||
| Supply voltage VS | 24 V DC (19.2 V DC … 28.8 V DC) | ||||||||||
| Residual ripple | ≤ 5 Vpp | ||||||||||
| Power consumption | ≤ 3.6 W (DC) | ||||||||||
| Switch-on time | ≤ 2.5 s | ||||||||||
|
|||||||||||
1) Applies to the voltage range between –30 V and +30 V.
| Mounting | Snap-on mounting on 35 mm mounting rail according to EN 60715 |
| Dimensions (W x H x D) | 22.6 mm x 99 mm x 113.5 mm |
| Weight | + 160 g |
| Enclosure rating | IP20 (EN 60529) |
| Ambient operating temperature | –20 °C … +55 °C |
| Storage temperature | –25 °C … +75 °C |
| Air humidity | 15 % … 95 %, Non-condensing |
| Vibration resistance | 10 Hz … 55 Hz (EN 60068-2-6) |
| Shock resistance | 10 g, 16 ms (EN 60068-2-29) |
Đại lý SICK vietnam, SICK viet nam, SICK vietnam distributor, Phân phối SICK tại việt nam
Đại lý SICK vietnam, SICK viet nam, SICK vietnam distributor, Phân phối SICK tại việt nam
Đại lý SICK vietnam, SICK viet nam, SICK vietnam distributor, Phân phối SICK tại việt nam
Đại lý SICK vietnam, SICK viet nam, SICK vietnam distributor, Phân phối SICK tại việt nam
Đại lý SICK vietnam, SICK viet nam, SICK vietnam distributor, Phân phối SICK tại việt nam
Reviews
There are no reviews yet.