Description
SICK WLL170-2N132
Product Summary
Photoelectric fiber optic switch WLL170-2N132
Manufacturer: Sick
Manufacturer part number: 6029515
SKU: 88976
Weight(kg): 0.0949
-
- Rapid response time (50 µs)
- Switching threshold adjustment via potentiometer, or teach-in via button or cable
- Four different teach-in modes
- Simple installation
- Red or green LED emitter
Your benefits
- Reliable, rapid process detection
- Low installation costs due to short commissioning time
- Flexible teach-in modes allow the sensor to be customized according to the specific application
- Emitted light ideal for color or contrast detection
- Easy programming via simple potentiometer and switch adjustment
| Features | |
| Dimensions (W x H x D): | 10.5 mm x 35.5 mm x 83.7 mm |
| Sensing range max.: | 0 mm … 4,000 mm, through-beam system 1) |
| Sensing range: | 0 mm … 160 mm, proximity system, 0 mm … 700 mm, through-beam system 2) 3) 4) |
| Light source: | LED 5) |
| Type of light: | Visible red light |
| Wave length: | 660 nm |
| Adjustment: | Potentiometer, 10-turn 6) |
| Time type: | Off-delayed |
| Delay time: | Selectable by sliding switch: ≥40 ms |
| Indication: | LED |
| Sensor/detection principle: | Fiber-optic photoelectric sensor |
| Angle of dispersion: | Ca. 65 ° |
| Housing design (light emission): | Rectangular |
| Focus: | See LL3 fiber-optic data |
| 1) LL3-TB02 and tip adapter LL3-TA01 2) Objects to be sensed with 90% reflectivity (based on DIN 5033 white standard). Sensing range depends on fiber-optic cable 3) LL3-DK06 4) LL3-TB01 5) Average service life of 100,000 h at TA = +25 °C 6) Scale 270° | |
| Mechanics/electronics | |
| Enclosure rating: | IP 66 1) |
| Supply voltage: | 10 V DC … 30 V DC 2) |
| Ripple: | 10 % 3) |
| Power consumption: | ≤ 30 mA 4) |
| Switching output: | NPN, open collector |
| Output current Imax.: | ≤ 100 mA |
| Response time: | ≤ 0.25 ms 5) |
| Switching frequency: | 2,000 Hz 6) |
| Connection type: | Cable, 3-wire, 2 m 7) |
| Cable material: | PVC |
| Conductor cross-section: | 0.2 mm² |
| Protection class: | III |
| Circuit protection: | A, B, C, D 8) 9) 10) 11) |
| Housing material: | ABS/PC, Plastic |
| Ambient operating temperature: | -25 °C … +55 °C |
| Ambient storage temperature: | -40 °C … +70 °C |
| Weight: | Ca. 70 g |
| Cable diameter: | 3.8 mm |
| Switching mode: | Light/dark-switching |
| Switching mode selector: | Selectable via light/dark selector |
| UL File No.: | NRNT2.E128350 & NRNT8.E128350 |
| 1) With correctly attached fibre-optic cable LL3 and closed protection hood 2) Limit values 3) May not exceed or fall short of VS tolerances 4) Without load 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) Do not bend below 0 °C 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) C = interference suppression 11) D = outputs overcurrent and short-circuit protected | |
Reviews
There are no reviews yet.