SIPIN W5-TP4V100-24J

Description

SIPIN W5-TP4V100-24J

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 100 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 4 to 20 mA; Buffering Time Code: Adjustable 1 to 22 Seconds.

PRODUCT SALIENT FEATURES:

• Independent adjustment of Max and BIAS
• Downward opening front Panel for easy Fuse replacement
• VR setting of Max and SFS are installed in the front panel, for easy adjustment
• Multi-LED display panel makes the operating indications clear
• The Auxiliary Powers (AC1, AC2) are independently controlled for all models
• Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)
• Top & bottom Shielding Covers are designed for safety and easy wiring installation
• In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out
• Main power is designed for 200-480VAC
• Automatic power frequency detection for 50-60 Hz. No need for selection or switch
• Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output
• In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out
• 4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use
• Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions
• Using European detachable control signal connector for easy replacement without the need of re-wiring installation
• Warranty: 1-Year from the date of purchase

POWER REGULATOR

W5-TP4V100-24J

Control mode : 3φphase angle control

Main source : 3φ 200~480VAC

Current rating :100A

Aux. source : 1φ220VAC

Input signal : 4~20mA

Soft start code : J, soft start 1~22  sec.

Other model Sipin:

W5-TP4V030-24J
W5-TP4V045-24J
W5-TP4V060-24J
W5-TP4V080-24J
W5-TP4V100-24J

W5-TP4V150-24J
W5-TP4V180-24J
W5-TP4V230-24J

W5-TP4V150-24J

W7S4V060-21KF

W5-TP4V100-24J

SP48P36

SP48P46

SP48P18

SP48P26

Đại lý SIPIN vietnam, SIPIN viet nam, SIPIN vietnam distributor, Phân phối SIPIN tại việt nam

Đại lý SIPIN vietnam, SIPIN viet nam, SIPIN vietnam distributor, Phân phối SIPIN tại việt nam

Đại lý SIPIN vietnam, SIPIN viet nam, SIPIN vietnam distributor, Phân phối SIPIN tại việt nam

Đại lý SIPIN vietnam, SIPIN viet nam, SIPIN vietnam distributor, Phân phối SIPIN tại việt nam

Đại lý SIPIN vietnam, SIPIN viet nam, SIPIN vietnam distributor, Phân phối SIPIN tại việt nam