SIPIN W5-TP4V060-24J

Description

SIPIN W5-TP4V060-24J

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 4 to 20 mA; Buffering Time Code: Adjustable 1 to 22 Seconds.

Item no.:W5-TP4V060-24J

Three-wire three phase angle control

Main power voltage: 3ψ 200-480VAC

Rated current: 60A

Auxiliary power source: 1ψ 220VAC

Input signal: 4~20 mA

Buffering time: Adjustable buffering time, 1~22 seconds

Features:

  • Independent adjustment of Max and BIAS.
  • Down-opened Panel, easy for fuse replacement.
  • VR of Max and SFS are installed in the front panel, easy for adjustment.
  • Multi-LED display panel makes the operating condition clear.
  • The auxiliary powers(AC1,AC2) are independently controlled for all models.
  • Build-in buffering output adjustment (SFS VR),adjusting range 1~22 seconds. (Only for the phase control product)
  • Top & bottom shielding covers are designed for safety and fashion out looking, also easy for wiring installation.
  • In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse burn-down.
  • Main power is one spec. Design for 200~480VAC.
  • Automatic power frequency detection for 50~60Hz. No need for selection for switch.
  • Automatic detection and display for power out-of-phase, SCR overheating and fuse burn-down with one set of alarm dry contact output.
  • In cases of SCR overheating or fuse burn-down, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse burn-down.
  • 4~20mA, 1~5VDC, 2~10VDC, 0~20mA, 0~5VDC, 0~10VDC, dry contact points, etc. and all control signals are ready to use.
  • Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions.
  • Using European detachable control signal connector for easy replacement without re-wiring installation.

 

  1. Thyristor Power Regulator W5-TP series SIPIN

W5-TP4V030-24J

W5-TP4V045-24J

W5-TP4V060-24J

W5-TP4V080-24J

W5-TP4V100-24J

W5-TP4V125-24J

W5-TP4V150-24J

W5-TP4V180-24J

W5-TP4V230-24J

W5-TP4V300-24J

W5-TP4V380-24J

W5-TP4V450-24J

W5-TP4V580-24J

W5-TP4V720-24J

Reviews

There are no reviews yet.

Be the first to review “SIPIN W5-TP4V060-24J”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Sản phẩm liên quan