Description
SMC SY7120-5GD-C10
5-Port Solenoid Valve Body Ported Single Unit SY7000 Series (SY7120-5GD-C10)
Product Description
– 5-Port Solenoid Valve Body Ported Single Unit SY7000 Series from SMC.
– Possible to drive cylinders up to Ø 80 at speed 300 mm/s (Ø 160 at 100 mm/s).
– With residual pressure release valve.
– With safety slide locking manual override.
– D-sub connector [IP67] manifold.
– PC wiring (with power supply terminal) manifold.
– Power consumption is reduced by power saving circuit.
– Wiring, piping, and operation are integrated on one side.
Configured Specifications
| Type | Solenoid Valves | Application | Single Use |
|---|---|---|---|
| Number of Ports | 5-Port Valve | Mounting Orientation | Direct |
| Specifications | Standard / Lubrication Free | Number of Solenoids | [Single] Single |
| Switching Type | 2-Position Exhaust | Status at Power Off | Self-Retaining |
| Voltage | DC24V | Pipe Port Type | One-Touch Plumbing |
| Plumbing Thread Nominal | – | Applicable Cylinder Dia.(Ø) | – |
| Plumbing | Direct Plumbing | Driving Type | Pilot Type Spool |
| CV Value | 0.86 | Connecting Tube Diameter | Ø10 |
| Seal Type | Soft Seal | Pressure Rating(MPa) | 0.15 to 0.7 |
| Pilot Air Supply | Internal | Manual Switch | Lock |
| Coil specifications | Standard | Lead wire electrical entry | Grommet / Lead wire length: 300 mm |
| Manual | Push-turn locking screwdriver-operated type | Indicator light / Surge voltage suppressor | Without indicator light / surge voltage suppressor |
| Bracket | No bracket | Made to order specifications | – |
| CE compliant | None | Valve specifications | – |
| Compliance with IEC standards | – | Type of fitting thread part | – |
| RoHS | – | – | – |
Reviews
There are no reviews yet.