Description
WENGLOR P1KL006
Features at a Glance
- Condition monitoring
- High switching frequency
- IO-Link 1.1
- Detect extremely small parts starting at 1 mm
The retro-reflex sensor works with a fine laser beam and a reflector. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of one millimeter over the entire range. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Optical Data |
|
|---|---|
| Range | 12,000 mm |
| Reference Reflector/Reflector Foil | RE6151BM |
| Smallest Recognizable Part | see Table 2 |
| Switching Hysteresis | < 15 % |
| Light Source | Laser collimated (red) |
| Wavelength | 680 nm |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
| Light Spot Diameter | see Table 1 |
| Two-Lens Optic | yes |
Electrical Data |
|
|---|---|
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 2,000 Hz |
| Switching frequency (speed mode) | 4,000 Hz |
| Response Time | 0.25 ms |
| Response time (speed mode) | 0.125 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -40 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
| FDA Accession Number | 1710976-001 |
Mechanical Data |
|
|---|---|
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M8 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 6 g |
Safety-relevant Data |
|
|---|---|
| MTTFd (EN ISO 13849-1) | 2,617.62 a |
Output |
|
|---|---|
| IO-Link | yes |
| PNP NC, PNP NO | yes |
Adjustable parameters |
|
|---|---|
| Output | Push-pull NPN PNP |
| Circuit | NC NO inactive Error output NC+NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Emitted light Switching point |
Table 1 |
|||
|---|---|---|---|
| Working Distance | 0,1 m | 5 m | 12 m |
| Light Spot Diameter | 4 mm | 11 mm | 22 mm |
| Table 2 | |||
|---|---|---|---|
| Distance, Sensor to Reflector | 2 m | 4 m | 12 m |
| Smallest Recognizable Part | 1,5 mm | 1 mm | 2,5 mm |
Reflector data |
|
|---|---|
| RQ100BA | 0.1 … 16 m |
| RE18040BA | 0.1 … 12 m |
| RQ84BA | 0.1 … 16 m |
| RR84BA | 0.1 … 16 m |
| RE9538BA | 0.1 … 4.5 m |
| RE6151BM | 0.1 … 12 m |
| RR50_A | 0.1 … 16 m |
| RE6040BA | 0.1 … 15 m |
| RE8222BA | 0.1 … 10 m |
| RR34_M | 0.1 … 2.5 m |
| RE3220BM | 0.1 … 7 m |
| RE6210BM | 0.1 … 4.5 m |
| RR25_M | 0.1 … 7 m |
| RR25KP | 0.1 … 2.5 m |
| RR21_M | 0.1 … 4 m |
| Z90R004 | 0.15 … 5 m |
| Z90R005 | 0.15 … 5.9 m |
| ZRAE02B01 | 0.1 … 7 m |
| ZRME01B01 | 0.1 … 3 m |
| ZRME03B01 | 0.1 … 4.5 m |
| ZRMR02K01 | 0.1 … 3 m |
| ZRMS02_01 | 0.1 … 4 m |
| RF505 | 0.1 … 2 m |
| RF508 | 0.1 … 2 m |
| RF258 | 0.1 … 2 m |
| ZRDF03K01 | 0.1 … 4 m |
| ZRDF10K01 | 0.1 … 4 m |
| Z1KC001 | 0.07 … 3.9 m |
| Z90R012 | 0.05 … 5.8 m |
| Z90R013 | 0.03 … 10.9 m |
| Z90R014 | 0.05 … 8.5 m |
| Z90R015 | 0.06 … 7 m |
Complementary Products |
|---|
|
Đại lý WENGLOR vietnam, WENGLOR viet nam, WENGLOR vietnam distributor, Phân phối WENGLOR tại việt nam
Đại lý WENGLOR vietnam, WENGLOR viet nam, WENGLOR vietnam distributor, Phân phối WENGLOR tại việt nam
Đại lý WENGLOR vietnam, WENGLOR viet nam, WENGLOR vietnam distributor, Phân phối WENGLOR tại việt nam
Đại lý WENGLOR vietnam, WENGLOR viet nam, WENGLOR vietnam distributor, Phân phối WENGLOR tại việt nam
Đại lý WENGLOR vietnam, WENGLOR viet nam, WENGLOR vietnam distributor, Phân phối WENGLOR tại việt nam
Reviews
There are no reviews yet.