ESA UV-2

CHARACTERISTICS
GENERAL:

• Spectral response: 185~260 nm
• Peepsight connection: Ø 3/4” gas
• Discharge starting voltage: (with UV radiation) 280V
• Recommended oper. voltage: 325 ±25V
• Max. voltage: 400V
• Recommended discharge current: 100µA
• Average discharge current (note A): 1mA
• Max. peak current (note B): 30mA
• Operating temperature -20~60°C
• Background (note C): max. 10 cpm
• Sensibility (note D) 5,000 cpm (> 1pW)
• Life service with continuous discharge > 10,000 hours

Applications:

• UV flame detector for industrial use.

Flame control devices that operate in permanent mode and according to the EN746 Norm, flowmeters, air/gas ratio regulators, temperature and pressure regulators, transformers and ignition electrodes: we have been developing and testing hardware and various technically advanced electronic components in our laboratories for more than twenty years. These components have been developed for detection, control, safety, regulation and process automatic control.
A fundamental characteristic is the possibility of being able to be controlled both locally as well as manually, automatically and remotely besides, obviously fully complying with the Norms.

  Bull.    Description    Series    Rev.    
E7000    Specification on how to choose and use flame sensor    FLAME SENSOR    01 – 06/97
E7001    High sensibility probes    UV-2    02 – 01/00
E7003    ESA UV-2 cheking device for permanent operation    ESA SHUTTER SHR    01 – 04/18
E7014    Microprocessor operated burner control device    ESA ESTRO    03 – 10/10
E7014P    Permanent operation microprocessor burner control    ESA ESTRO-PO    02 – 05/17
E7015    Serial gateway for ESA ESTRO and ESA REFLAM    ESA BRIDGE & EXP-3    03 – 01/17
E7019    Thermoregulator and air/gas ratio regulator    ESA TARC-II    01 – 06/02
E7021    Permanent operation microprocessor burner control device    ESA GENIO-S    01 – 05/15
E7022    Permanent operation microprocessor burner control device    ESA GENIO-PRS    01 – 05/15
E7061    Communication parameter programmer    ESA PROG-1    02 – 09/16
E7081    Serial communication interface for ESA ESTRO    ESA ECS-DRIVER    02 – 08/16
E7104    Serial converter for ESA ESTRO and ESA REFLAM    ESA PLEX-COM1    03 – 11/15
E7105    Multizone serial for ESA ESTRO flame control    ESA PLEX-STD    02 – 01/16
E7108    Pulse Firing controller for ESA ESTRO and ESA REFLAM    ESA PLEX-PULSE    01 – 12/16
E7210    Flow rate and pressure transmitter    ESA PT II    03 – 01/17
E7220    Portable differential pressure gauge    ESA DPG-E    02 – 10/15
E7301    Electric servomotor    ESA SERIO TPF    01 – 05/14
E7802    Burner control and flame detector for permanent and not-permanent operation    ESA REFLAM-H    01 – 04/17