FESTO CTEU-PN

Description

FESTO CTEU-PN

The system

• CTEU fieldbus modules for valve terminals
  • Festo-specific interface (I-Port)
  • Input modules CTSL for detecting sensor signals
  • Connection for the installation system CPI from Festo
  • Direct and easy networking of valve terminals and other devices via a bus con
  nection
  • Wide range of applications thanks to high degree of protection to IP65/67
  • Universal connection technology (Sub-D, M12, terminal strip)
  • Optional decentralised installation of the bus node for connecting two valve
  terminals
  • Basic diagnostics: undervoltage, short circuit
  CTEU for universal use of valve terminals. Thanks to the Festo-specific standar
  dised definition of the interface (I-Port), the fieldbus modules can be used for dif
  ferent types of valve terminal.
  The following protocols are currently supported:
  • CANopen
  • DeviceNet
  • CC-Link
  • PROFIBUS
  • EtherCAT
  • AS-Interface
  • PROFINET
  • EtherNet/IP
  • VARAN
  • Installation system CPI
  • IO-Link

Valve terminal configurator

A valve terminal configurator is available online to help you select a suitable valve
terminal.
Select a valve terminal with I-Port interface and order the relevant CTEU bus
nodes. The bus nodes then only need to be placed on the valve terminal.
The ident. code for the valve terminals specifies the valve functions, the number
of valves and vacant valve positions, as well as the additional functions and the
type of compressed air supply.
As is the case with all Festo products, all valve terminals are supplied:
• Fully pre-assembled
• Equipped with fittings on request
• Tested for electrical function
• Tested for pneumatic function
• Securely packaged
• User documentation can be downloaded free of charge

Thông số kỹ thuật Bus node CTEU-PN 2201471 Festo

Feature	Value
Shipping date	View
Dimensions W x L x H	40 mm x 91 mm x 50 mm
Grid dimension	40 mm
Mounting type	On electrical interface On electrical connection block
Product weight	93 g
Protocol	PROFINET
Fieldbus interface	Ethernet
Fieldbus interface, protocol	PROFINET RT
Fieldbus interface, type of connection	2x socket
Fieldbus interface, connection technology	M12x1, D-coded in accordance with EN 61076-2-101
Fieldbus interface, number of pins/wires	4
Fieldbus interface, electrical isolation	Yes
Fieldbus interface, transmission rate	100 Mbit/s
Internal cycle time	1 ms per 1 byte of user data
Maximum address volume for inputs	64 Byte
Maximum address volume for outputs	64 Byte
Power supply, function	Electronics and load
Power supply, type of connection	Plug
Power supply, connection technology	M12x1, A-coded in accordance with EN 61076-2-101
Power supply, number of pins/wires	5
Diagnosis	Communication error System diagnostics Undervoltage
Additional functions	Conformance class C Fast Start Up (FSU) LLDP MRP PROFINET IRT PROFIenergy SNMP Shared device Web servers
Configuration support	GSDML file
Product-specific LED display	PS: operating voltage for electronics and load supply X1: System status module I port 1 X2: System status module I port 2
Bus-specific LED display	NF: Network error TP1: network active, port 1 TP2: network active, port 2
Operating voltage range DC	18 … 30 V
Nominal operating voltage DC	24 V
Intrinsic current consumption at operating voltage	Typically 80 mA
Max. power supply	4 A
Authorisation	RCM Mark c UL us – Listed (OL)
KC mark	KC-EMV
CE mark (see declaration of conformity)	to EU directive for EMC
Corrosion resistance classification CRC	2 – Moderate corrosion stress
Storage temperature	-20 … 70 °C
Protection class	IP65 IP67
Note on degree of protection	in assembled condition Unused connections sealed
Ambient temperature	-5 … 50 °C
Material housing	PA
Materials note	Contains PWIS substances Conforms to RoHS