Description
PEPPERL+FUCHS NJ2-12GM40-E2-V1
Inductive sensor
Technical data
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | sn | 2 mm |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | sa | 0 … 1.62 mm |
| Actual operating distance | sr | 1.8 … 2.2 mm typ. |
| Reduction factor rAl | 0.23 | |
| Reduction factor rCu | 0.21 | |
| Reduction factor r304 | 0.7 | |
| Output type | 3-wire |
| Operating voltage | UB | 10 … 60 V | |||
| Switching frequency | f | 0 … 3000 Hz | |||
| Hysteresis | H | 1 … 10 % typ. 3 % | |||
| Reverse polarity protection | reverse polarity protected | ||||
| Short-circuit protection | pulsing | ||||
| Voltage drop | Ud | ≤ 3 V | |||
| Voltage drop at IL | |||||
|
|||||
| Operating current | IL | 0 … 200 mA | |||
| Off-state current | Ir | ≤ 0.5 mA | |||
| No-load supply current | I0 | ≤ 9 mA | |||
| Time delay before availability | tv | ≤ 20 ms | |||
| Switching state indicator | LED, yellow | ||||
Reviews
There are no reviews yet.