Description
SCHNEIDER LXM32SD72N4
motion servo drive, Lexium 32, 24A, three phase, supply voltage 208 to 480V, 7kW
LXM32SD72N4
| Range of product | Lexium 32 |
|---|---|
| Device short name | LXM32S |
| Product or component type | Motion servo drive |
| Format of the drive | Book |
| Network number of phases | Three phase |
| [Us] rated supply voltage | 200…240 V – 15…10 % 380…480 V – 15…10 % |
| Supply voltage limits | 170…264 V 323…528 V |
| Supply frequency | 50/60 Hz – 5…5 % |
| Network frequency | 47.5…63 Hz |
| EMC filter | Integrated |
| Continuous output current | 24 A at 8 kHz |
| Output current 3s peak | 72 A at 208 V for 5 s 72 A at 480 V for 5 s |
| maximum continuous power | 6500 W at 208 V 13000 W at 400 V 13000 W at 480 V |
| Nominal power | 5 kW at 208 V 8 kHz 7 kW at 400 V 8 kHz 7 kW at 480 V 8 kHz |
| Line current | 21.1 A 34 % at 208 V, with external line choke of 1 mH 22.5 A 45 % at 400 V, with external line choke of 1 mH 19.5 A 55 % at 480 V, with external line choke of 1 mH 21.9 A 106 % at 208 V, without line choke 17.3 A 126 % at 400 V, without line choke 14.6 A 129 % at 480 V, without line choke |
| Switching frequency | 8 kHz |
|---|---|
| Overvoltage category | III |
| Maximum leakage current | 30 mA |
| Output voltage | <= power supply voltage |
| Electrical isolation | Between power and control |
| Type of cable | Single-strand IEC cable (temperature: 50 °C) copper 90 °C XLPE/EPR |
| Electrical connection | Terminal, clamping capacity: 3 mm², AWG 12 (CN8) |
| Tightening torque | CN8: 0.5 N.m |
| Discrete input number | 2 capture discrete input(s) |
| Discrete input type | Capture (CAP terminals) |
| Sampling duration | 0.25 ms |
| Discrete input voltage | 24 V DC for capture |
| Discrete input logic | Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 |
| Response time | <= 5 ms compliment of STO_A, compliment of STO_B |
| Discrete output number | 3 |
| Discrete output type | Logic output(s) (DO)24 V DC |
| Discrete output voltage | <= 30 V DC |
| Discrete output logic | Positive or negative (DO) conforming to EN/IEC 61131-2 |
| Contact bounce time | <= 1 ms for compliment of STO_A, compliment of STO_B |
| Braking current | 50 mA |
| Response time on output | 250 µs (DO) for discrete output(s) |
| Safety function | STO (safe torque off), integrated |
| Safety level | SIL 3 conforming to EN/IEC 61508 |
| Communication interface | Modbus, integrated SERCOS III, integrated |
| Connector type | RJ45 (labelled CN7) for Modbus |
| commissioning port | 2-wire RS485 multidrop for Modbus |
| Transmission rate | 9600, 19200, 38400 bps for bus length of 40 m for Modbus |
| Number of addresses | 1…247 for Modbus |
| Status LED | 1 LED (red) servo drive voltage |
| Signalling function | Display of faults 7 segments |
| marking | CE |
| Operating position | Vertical +/- 10 degree |
| Product compatibility | Servo motor BMH (140 mm, 2 motor stacks) |
| Width | 108 mm |
| Height | 270 mm |
| Depth | 237 mm |
| Net weight | 4.8 kg |
Đại lý SCHNEIDER vietnam,SCHNEIDER viet nam, SCHNEIDER vietnam distributor, Phân phối SCHNEIDER tại việt nam
Đại lý SCHNEIDER vietnam,SCHNEIDER viet nam, SCHNEIDER vietnam distributor, Phân phối SCHNEIDER tại việt nam
Đại lý SCHNEIDER vietnam,SCHNEIDER viet nam, SCHNEIDER vietnam distributor, Phân phối SCHNEIDER tại việt nam
Đại lý SCHNEIDER vietnam,SCHNEIDER viet nam, SCHNEIDER vietnam distributor, Phân phối SCHNEIDER tại việt nam
Đại lý SCHNEIDER vietnam,SCHNEIDER viet nam, SCHNEIDER vietnam distributor, Phân phối SCHNEIDER tại việt nam
Reviews
There are no reviews yet.