SICK WL100L-F2131 6030709

• • Standard miniature housing with M3 threaded mounting holes
  • Laser emitter LED, class 1
  • Standard optics
  • Light/dark switching via rotary switch
  • Switching frequency of 2000 Hz
  • Polarizing filter used

Your benefits

• Laser light spot combined with 2 kHz switching frequency ensures reliable detection of small objects, even at fast detection speeds
• Less contamination due to high optical operating reserve
• M3 threaded mounting holes provide easy installation
• Polarization filter and consequently reliable detection of objects with shiny surfaces and prevents false switching

Features

Sensor/detection principle:	Photoelectric retro-reflective sensor, Standard optics
Dimensions (W x H x D):	11 mm x 31 mm x 20 mm
Housing design (light emission):	Rectangular, Slim
Sensing range max.:	0.08 m … 12 m 1)
Sensing range:	0.08 m … 10 m 2)
Type of light:	Visible red light
Light source:	Laser 3)
Laser class:	1
Wave length:	650 nm
Light spot diameter (distance):	Ø 12 mm (10 m)
Sensitivity adjustment:	Potentiometer, 270°
Focus adjustable:	–
1) 2) P250F  3) Average service life 50,000 h at TA = +25 °C
Mechanics/electronics
Supply voltage:	10 V DC … 30 V DC 1)
Ripple:	± 10 % 2)
Power consumption:	≤ 30 mA 3)
Switching output:	PNP, Light/dark-switching, manually selectable, open collector
Signal voltage PNP HIGH / LOW:	UV – 1,8 V / ca. 0 V
Output current Imax.:	100
Response time:	< 0.25 ms 4)
Switching frequency:	2,000 5)
Connection type:	Connector M8, 3-pin
Circuit protection:	A, B, D 6) 7) 8)
Weight:	10 g
Polarisation filter:
Housing material:	ABS/PC/POM
Optics material:	PMMA
Enclosure rating:	IP 65
Items supplied:	Stainless steel mounting bracket (1.4301/304) BEF-W100-A, Reflector P250F
Ambient operating temperature:	-10 °C … 50 °C
Ambient storage temperature:	-40 °C … 70 °C
UL File-No.:	CDRH-conform
1) Limit values, operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS tolerances  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) A = VS connections reverse-polarity protected  7) B = inputs and output reverse-polarity protected  8) D = outputs overcurrent and short-circuit protected