YOKOGAWA EJA110E-DMS4G-912DB/D4

EJA110E : Differential pressure transmitter

D : 4 to 20 mA DC with digital communication (BRAIN protocol)
M : 1 to 100 kPa (4 to 400 inH2O)
S : Refer to “Wetted Parts Material” Table
4 : with 1/2 NPT female process connector
G : 316L SST
9 : Horizontal piping and left side high pressure
1 : Cast aluminum alloy
2 : 1/2 NPT female, two electrical connections without blind plugs

D : Digital indicator*8
B : 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
D4: M calibration (kgf/cm2 unit)

Mô hình hoàn chỉnh: EJA110E-DMS4G-912DB/D4

• Manufacturer : Yokogawa
• Product No. : EJA110E-DMS4G-912DB/FF1/D4/M11/T12
• Product Type : Differential Pressure Transmitter
• This product is a replacement for EJA110A-DMS4B-92DB/FF1/D4/M11/T12 Differential Pressure Transmitter
• Output signal : D = 4 to 20 mA DC with digital communication (BRAIN protocol)
• Measurement span (capsule) : M = 1 to 100 kPa (4 to 400 inH2O)
• Wetted parts material : S
  • Cover flange and process connector : ASTM CF-8M
  • Capsule : Hastelloy C-276 *2 (Diaphragm), F316L SST, 316L SST (Others)
  • Capsule gasket : Teflon-coated 316L SST
  • Vent/Drain plug : 316 SST
• Process connections : 4 = with 1/2 NPT female process connector
• Bolts and nuts materia : G = 316L SST
• Installation : 9 = Horizontal piping and left side high pressure
• Amplifier housing : 1 = Cast aluminum alloy
• Electrical connection : 2 = 1/2 NPT female, two electrical connections without blind plugs
• Integral indicator : D = Digital indicator
• Mounting bracket : B = 304 SST 2-inch pipe mounting, flat type (for horizontal piping)
• Factory Mutual (FM) : FF1
  • FM Explosionproof Approval *1
  • Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250
  • Explosionproof for Class I, Division 1, Groups B, C and D, Dust-ignitionproof for Class II/III, Division 1,
  • Groups E, F and G, in Hazardous locations, indoors and outdoors (Enclosure: Type 4X)
  • “FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.”
  • Temperature class: T6, Amb. Temp.: –40 to 60°C (–40 to 140°F)
• Calibration units : D4 = M calibration (kgf/cm2 unit)
• Material certificate : M11 = Cover flange, Process connector
• Pressure test/Leak test certificate : T12 = Test Pressure: 16 MPa(2300 psi)
• Weight : 2.8 Kg

Ordering Information of Yokogawa EJA110E-JMS5J-912DB Differential Pressure Transmitter EJA110E DP Transmitters

EJA110E-JMS5J-912DB
EJA110E-JLH4J-917DB/D4
EJA110E-JMS4J-712DD/D4
EJA110E-FMS5G-919DD
EJA110E-JHS4G-717DD
EJA110E-JLH4G-712DD/X2
EJA110E-JLH4G-712DD/SF2/X2
EJA110E-JMS4G-919DN
EJA110E-JHS5G-92CDJ/KS21
EJA110E-JHS5G-92CDJ/NS21
EJA110E-JMS5G-92CDJ/KS21
EJA110E-JMS5G-92CDJ/NS21

EJA118E-JHSCJ-912DB-WA13A1SW00-BA2A
EJA118E-JMSCJ-912DB-EA14A1SE02-BB25
EJA118E-JMSCJ-912DB-EA14A1SE02-AB2A/D4
EJA210E-JMS4J-912DN-WA18A1WWC0B/D4
EJA210E-JMS4J-912DN-EA14A2SE01-B/D4
EJA210E-JMS4J-912DN-WA13B2SW00-B

EJA430E-JAS4G-919DB/X2/A/D3
EJA438E-FASCG-912DN-WA12C1SW00-BA23/KS26

DY250-EBLBA1-2D/X2/SCT
YTA610-JA1A2DB

EJA430E-JAS4J-917DB/D4
EJA510E-JAS4N-012DL/D4
EJA530E-JAS4N-012DL/D4
EJA530E-JCS4N-012EL
EJA530E-JBS4N-012EL
EJA530E-JBS8N-015DN/D4/K2
EJA530E-JCS4N-02CDL/KS21
EJA530E-JCS4N-02CDL/NS21
EJA530E-JBS4N-02CDL/KS21
EJA530E-JBS4N-02CDL/NS21

EJX110A-DLH4G-917EB/D4
EJX110A-DMH4G-917EB/D4
EJX530A-DCS7N-017EL
EJX530A-DCS7N-017NN

EJA110E-JMS4J-912EB/KU22/D3/M11